x404.co.uk
http://x404.co.uk/forum/

Forumites Drives
http://x404.co.uk/forum/viewtopic.php?f=4&t=428
Page 3 of 6

Author:  james016 [ Mon Jun 01, 2009 1:34 pm ]
Post subject:  Re: Forumites Drives

I will be ordering my new parts in the next week or so.
Spec:

Intel Core i7 920
Gigabyte X58-UD5 Mobo
1TB Samsung HDD
Gainward GLH 4870X2 graphics card
Samsung DVD Writer
6GB OCZ DDR3 memory
iiyama 24inch HD monitor
Silverstone TJ07 case
Card reader
Silverstone DA1000 PSU
Noctua CPU cooler

You will get a pic when built.

Author:  pcernie [ Mon Jun 01, 2009 4:33 pm ]
Post subject:  Re: Forumites Drives

^ Is it worth you holding off for the I5 chips that are out soon (there was a story on bit-tech or whatever it's called)? I don't know much about CPUs these days...

Author:  Linux_User [ Mon Jun 01, 2009 5:27 pm ]
Post subject:  Re: Forumites Drives

pcernie wrote:
^ Is it worth you holding off for the I5 chips that are out soon (there was a story on bit-tech or whatever it's called)? I don't know much about CPUs these days...


Isn't the i5 going to be an inferior model?

Forgive my ignorance on Intel processors, I buy AMD...

Author:  Danstevens [ Mon Jun 01, 2009 5:38 pm ]
Post subject:  Re: Forumites Drives

Linux_User wrote:
pcernie wrote:
^ Is it worth you holding off for the I5 chips that are out soon (there was a story on bit-tech or whatever it's called)? I don't know much about CPUs these days...


Isn't the i5 going to be an inferior model?

Forgive my ignorance on Intel processors, I buy AMD...


Yeah, it will be a lower model but as with older Intel low models, it might be cheap and overclock well. The price of i7 may also come down as people buy i5 as a cheaper alternative.

Author:  pcernie [ Mon Jun 01, 2009 6:01 pm ]
Post subject:  Re: Forumites Drives

This'll either help or confuse matters:

http://www.pcadvisor.co.uk/news/index.c ... id=116612&

:?

Author:  james016 [ Tue Jun 02, 2009 10:31 am ]
Post subject:  Re: Forumites Drives

That article confused me more than it helped.

If I wait for the i5 then I'll be waiting for the new i7s or whatever else is on the horizon. My original spec was a Core Quad processor but I waited for the i7s. Anyhoo I placed the order this morning and should get it Saturday.

Author:  james016 [ Mon Jun 15, 2009 2:22 pm ]
Post subject:  Re: Forumites Drives

Got my PC built and it is finally running well.

Had to do a rebuild as every time I ran a game, the graphics driver would crash. Then the NIC's stopped working but I think that was to do with the front panel audio cable shorting them.

I can finally play some modern games. HL2 and FEAR look amazing now that I can run them at full graphics.

Author:  boothy_1993 [ Wed Jun 17, 2009 5:49 pm ]
Post subject:  Re: Forumites Drives

james016 wrote:
Got my PC built and it is finally running well.

Had to do a rebuild as every time I ran a game, the graphics driver would crash. Then the NIC's stopped working but I think that was to do with the front panel audio cable shorting them.

I can finally play some modern games. HL2 and FEAR look amazing now that I can run them at full graphics.


can u post sum piccies please :-)

Author:  koli [ Thu Jul 02, 2009 7:36 pm ]
Post subject:  Re: Forumites Drives

boothy_1993 wrote:
can u post sum piccies please :-)


Exactly.

Come on guys, this chitchat does not belong here :roll:
Take it elsewhere. Can mode delete these mega offtopic posts? They are kind of ruining the thread...

Author:  mars-bar-man [ Thu Jul 02, 2009 7:40 pm ]
Post subject:  Re: Forumites Drives

Well, unfortunately OCUK cocked up...again, so my case is now going to arrive either tomorrow, or Monday, doubt it'll be here Sat, that'd be a bit hopeful. Anywho, I'll put my rig in it, show you some piccies, then when I've got all the watercooling kit plumbed in, I'll post them, simplez :D

Author:  boothy_1993 [ Sat Jul 04, 2009 2:55 pm ]
Post subject:  Re: Forumites Drives

mars-bar-man wrote:
Well, unfortunately OCUK cocked up...again, so my case is now going to arrive either tomorrow, or Monday, doubt it'll be here Sat, that'd be a bit hopeful. Anywho, I'll put my rig in it, show you some piccies, then when I've got all the watercooling kit plumbed in, I'll post them, simplez :D


has it come yet??

Author:  themcman1 [ Mon Jul 06, 2009 9:11 am ]
Post subject:  Re: Forumites Drives

soddit112 wrote:
Intel Core 2 Duo E8400 @ 3.06GHz


It's actually illegal not to overclock that chip. :)

I should hopefully have the money for my Lian Li soonish. :D

Author:  soddit112 [ Mon Jul 06, 2009 1:58 pm ]
Post subject:  Re: Forumites Drives

themcman1 wrote:
soddit112 wrote:
Intel Core 2 Duo E8400 @ 3.06GHz


It's actually illegal not to overclock that chip. :)


i did try, but my motherboard wasnt too obliging. i got it to 3.2GHz then got bored of constantly having to reset the CMOS when it crashed :(

i may have another bash at it though :wink: but i think my temps are a bit high: 43 DegC at idle with speedstep turned on (~2.1GHz), with my ACF7-pro @ 50%, hits just under 60 DegC with IntelBurnTest using 100% of CPU, ACF7 @ 100% :?

Author:  mars-bar-man [ Mon Jul 06, 2009 2:12 pm ]
Post subject:  Re: Forumites Drives

soddit112 wrote:
themcman1 wrote:
soddit112 wrote:
Intel Core 2 Duo E8400 @ 3.06GHz


It's actually illegal not to overclock that chip. :)


i did try, but my motherboard wasnt too obliging. i got it to 3.2GHz then got bored of constantly having to reset the CMOS when it crashed :(

i may have another bash at it though :wink: but i think my temps are a bit high: 43 DegC at idle with speedstep turned on (~2.1GHz), with my ACF7-pro @ 50%, hits just under 60 DegC with IntelBurnTest using 100% of CPU, ACF7 @ 100% :?

That does seem a tad high, what volts you putting through it?

Author:  soddit112 [ Mon Jul 06, 2009 2:19 pm ]
Post subject:  Re: Forumites Drives

mars-bar-man wrote:
That does seem a tad high, what volts you putting through it?


default, CPU-Z and Abit uGuru both say around 1.19v

im just about to run IntelBurnTest @ 3.2GHz, so far no voltage increases have been required :)

Page 3 of 6 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/